DIY Machinist Tools

A machinist is a person who uses machine tools, for example, lathes, milling machines, and grinders to produce precision metal parts. Being a machinist requires one to know the right tools in doing the right job. Again those willing to start as machinists should also be recommended the right tools. They start with a few collections of the machinist tools which with time they grow and become experienced. The core set of DIY Machinist Tools that most machinists agree to be essentials in finishing most projects are discussed below.


DIY Machinist Tools

These are the most essential machinist tools. The most used caliper is the eight-inch dial caliper. It’s used on regular basis in most DIY Machinist Tools projects. The good thing with this tool is that its batteries do not go dead. It is better to use this caliper than the digital one. Calipers are good to use when making accurate measurements of thickness and dimensions.

Set of starter End:-

DIY Machinist Tools

They are also called milling bits. In most DIY projects, end mills are used in making different shapes and holes. This is common during milling, slotting, drilling, contouring, and even reaming applications. End mills are designed in a way that they have cutting teeth on the face and on the edge of the body which can be used in cutting different materials in several directions.

Edge finder:-

DIY Machinist Tools

These are used to find the edge of a part of a workpiece or locate the center of a hole. The DIY Machinist Tools is commonly used to locate part zero.

Dial indicator:-

Dial indicator

This tool is primarily used as a measuring tool in precision engine building. They measure deck clearances, crankshaft thrust, and straightness. Also, they measure lifter travel and also other measurements that involve the distance of two surfaces and component travel. They can also be applied to align workpieces in machines, check spindle run out, and gain measuring surface roughness.

Deburring set:-

Deburring set

This machine contains one or more tools that are used in smoothing burrs out of the machined metal. The way the tool is oriented is what allows for consistent quality deburring. Most of these machines use discs, brushes, and belt heads in grinding burrs out of the workpieces. The deburring set is very expensive. It uses the whole chamfer attachment all the time.

Anti-Fatigue Mat:-

Anti-Fatigue Mat

Anti-fatigue mat is a mat that is used in helping reduce stress on the lower body due to standing for long periods. Its role in mechanistic work is to encourage the subtle movement of the body muscles to keep blood flowing. It’s usually made up of soft and flexible material like rubber.

It causes feet and the muscles to contract always keeping balance. This ensures blood flow throughout the entire body. In mechanistic work, the inexpensive anti-fatigue mat works very well. It’s very easy to clean while the metal chips do not get ground into the surfaces.

Permanent marker:-

Permanent marker

This is a machinist tool used for writing on metals, plastics, ceramics, wood, stone, and cardboards. A permanent marker that is extra fine is recommended for machinist work. They work by locating points. It’s very quick by finding the center of a square by drawing the X mark with a line from each corner using the permanent marker.

Machinist square:-

Machinist square

This is a machinist tool that is used by metalworkers to confirm that projects are properly aligned. The tool consists of two straight edges that are set at right angles. Its commonly used by carpenters and machinists to check the correctness of right angles.

It’s also a guide when drawing lines, and when locating holes. The machinist tool can be of two types which the precision steel square and the combination square set. These are basic in guiding for marking out workpiece before cutting.



It is also known micrometer screw gauge. The tool is calibrated serving widely in measuring components. It is useful in measuring the diameter of circular objects, measuring the diameter of wire and thickness of a paper. Consequently, it can be used in measuring the depth, length, and thickness of small objects.

Machinist Calculator:-

Machinist Calculator

This is a tool with, sine, cosine, and tangent functions. Its effectively used in performing precise, accurate calculations, which range from basic arithmetic to complex mathematics. These formulas aid machinists by establishing speed feeds, and times without guesswork.

Set of files:-

Set of files

This machinist tool is used where the deburring tool is too large to be used. It’s also commonly used when removing burs from rough cut stock before installing it in the mill vice. Other general uses in the mechanistic project can be chamfering, smoothing, and finishing metals, wood, plastics. It’s also useful in filing, shaping, deburring, and setting.

6″ Scale (Ruler):-

6″ Scale (Ruler)

This is a machinist tool used precisely in adjusting the tension on springs to make sure that the two pieces are not close together or too far apart. The narrow rule is used to measure slot, slit, and thinning pipes. A machinist uses scale in making drawings. Generally, it’s used in measuring actual sizes.

Center punch:-

Center punch

A center punch is a machinist drilling tool used for marking the center of a point showing the center of a whole. It is a handy tool. It marks the center of the drilling hole to target the tip of a drill.

Related Posts:-

Manish Yadav

Add comment